
2026-11-16
A: Dacromet bolts are high-performance steel fasteners protected by a specialized zinc-aluminum flake coating (Dacromet / zinc flake coating). This thin inorganic layer delivers outstanding corrosion resistance and long-lasting rust prevention. Unlike electroplated zinc or hot-dip galvanizing, Dacromet forms overlapping layers of zinc and aluminum flakes in a chromate binder, combining barrier protection, sacrificial cathodic protection, and passivation. Typical thickness is only 5–15 μm, preserving thread geometry while providing superior anti-corrosion performance for bolts, screws, nuts, and studs.
A: Cleaned bolts are coated by dip-spin or spray with a water-based slurry of zinc flakes, aluminum flakes, and binder, then heat-cured (~280–320°C). The cured film provides three key anti-rust mechanisms:
A: Dacromet bolts typically withstand 720–1,500+ hours in neutral salt spray tests (ASTM B117 / ISO 9227) without red rust—often 7–20 times better than conventional electrogalvanized bolts (96–240 hours). High-grade coatings can exceed 1,200–2,000 hours. This exceptional rust prevention makes them ideal for coastal, industrial, automotive underbody, and outdoor structural applications.
Table 1: Comparison of Common Bolt Coatings for Corrosion Resistance
| Metric | Electroplated Zinc | Hot-Dip Galvanizing | Dacromet |
| Thickness | 5–15 μm | 40–100 μm | 5–15 μm |
| Salt Spray (no red rust) | 96–240 h | 500–1,000 h | 720–1,500+ h |
| H Embrittlement Risk | High (≥10.9) | Medium | None |
| Max Temp. | ~120–150°C | ~200°C | Up to 300°C+ |
| Thread Fit Impact | Minimal | Significant | Minimal |
Highlighted cells show Dacromet advantages in anti-rust performance and suitability for high-strength bolts.
A: Grade 8.8, 10.9, 12.9 and similar high-tensile bolts are vulnerable to hydrogen embrittlement from traditional electroplating and acid pickling. This can cause delayed brittle fracture under load. Dacromet is a non-electrolytic process that introduces no hydrogen, eliminating embrittlement risk. Combined with excellent thread fit, controllable friction coefficients, and superior rust resistance, it is the coating of choice for safety-critical bolted joints in automotive, structural, rail, and wind-energy applications.
A: Dacromet bolts excel wherever long-term corrosion resistance and rust prevention are essential:
A: Dacromet coatings remain stable and retain anti-corrosion properties up to 300°C continuous service (higher short-term). Conventional zinc plating degrades near 100–150°C and hot-dip galvanizing near 200°C. This thermal durability, together with good adhesion and mechanical damage resistance, ensures reliable rust prevention even under thermal cycling.
Table 2: Key Technical Attributes of Dacromet Bolts
| Attribute | Typical Value / Characteristic |
| Coating System | Zinc-aluminum flake in inorganic binder |
| Appearance | Matte / satin silver-gray |
| Coating Thickness | 5–15 μm (typically 6–12 μm); preserves thread fit |
| Salt Spray Resistance | ≥720–1,000 h to red rust (higher grades >1,200 h) |
| Hydrogen Embrittlement | None – ideal for high-strength bolts (10.9 / 12.9) |
| Heat Resistance | Stable to 300°C continuous service |
| Friction Coefficient | Controllable with topcoats (μ ≈ 0.10–0.18) |
A: The coating is thinner than heavy hot-dip galvanizing, so extremely abrasive environments may benefit from additional topcoats or design protection. Traditional Dacromet contained hexavalent chromium; modern chrome-free zinc-flake systems (e.g., certain Geomet grades) meet stricter environmental rules while retaining high corrosion resistance. Always pair bolts with compatible coated nuts and washers for uniform joint anti-rust performance, and ensure proper substrate preparation for optimal adhesion.
A: For reliable corrosion resistance and rust prevention:
Dacromet bolts combine thin-film dimensional accuracy with multi-mechanism corrosion protection—barrier layers, sacrificial zinc action, and passivation. They deliver far superior rust resistance compared with conventional coatings, eliminate hydrogen embrittlement risk for high-strength fasteners, and maintain performance up to 300°C. Properly specified Dacromet-coated bolts provide reliable, long-lasting anti-corrosion and anti-rust durability for demanding bolted joints in automotive, infrastructure, energy, and industrial applications.