DACROMET COATED FLANGE BOLTS

Новости

 DACROMET COATED FLANGE BOLTS 

2026-11-18

1. What is a Dacromet Coated Flange Bolt?

A Dacromet coated flange bolt is a high-strength industrial fastener (typically a hex head bolt or stud bolt used with flanges) that has been surface-treated with a zinc-aluminum flake coating known as Dacromet (also called zinc flake coating or DACROMET®). This advanced anti-corrosion coating provides outstanding rust protection and long-term durability in harsh environments.

Unlike traditional electro-galvanizing, Dacromet is a non-electrolytic process that deposits microscopic zinc and aluminum flakes bonded by an inorganic binder. The result is a thin, uniform, silver-gray coating that offers superior corrosion resistance without the risk of hydrogen embrittlement — making it ideal for high-tensile flange bolts and critical bolting assemblies.

Key Features of Dacromet Flange Bolts

  • Excellent anti-rust and anti-corrosion performance (salt spray up to 1000+ hours)
  • No hydrogen embrittlement — safe for high-strength Grade 8.8 / 10.9 / 12.9 bolts
  • Thin coating (6–12 μm) that does not affect thread fit or torque values significantly
  • Good heat resistance (up to 300°C continuous service)
  • Environmentally friendlier than traditional chromium-based coatings in modern formulations

2. How Does Dacromet Provide Corrosion Protection?

Dacromet achieves anti-corrosion performance through a multi-layer barrier and sacrificial mechanism:

1.Barrier Protection: The dense zinc-aluminum flake structure creates a physical barrier that blocks moisture, oxygen, and corrosive chemicals from reaching the steel substrate of the flange bolt.

2.Sacrificial Protection: Zinc flakes act as a sacrificial anode. Even if the coating is scratched, the surrounding zinc continues to protect the exposed steel, significantly delaying red rust formation.

3.Passivation Layer: The inorganic binder forms a stable passive film that further enhances long-term rust resistance of the bolted joint.

DACROMET COATED FLANGE BOLTS (1)

3. Corrosion Resistance Comparison

The table below compares the typical anti-corrosion performance of different surface treatments commonly applied to flange bolts and stud bolts:

Surface Treatment Typical Salt Spray (ASTM B117) Hydrogen Embrittlement Risk Suitable for High-Strength Bolts
Electro-Galvanizing (Zinc Plating) 72 – 200 hours High Limited (Grade ≤ 8.8)
Hot-Dip Galvanizing (HDG) 400 – 600 hours Medium Caution required
Dacromet / Zinc Flake Coating 500 – 1500+ hours None / Very Low Excellent (up to 12.9)
Xylan / PTFE Coating 1000 – 4000 hours* None Excellent
Stainless Steel (A2/A4) Inherent resistance None Yes (different grades)

* With proper undercoat. Dacromet offers the best balance of cost, corrosion protection, and mechanical integrity for carbon steel flange bolts.

4. Advantages of Dacromet Flange Bolts

Superior Anti-Rust Performance: Dacromet coated bolts resist red rust far longer than conventional zinc-plated fasteners, making them ideal for outdoor, coastal, and industrial environments.

No Hydrogen Embrittlement: Critical for high-strength flange bolts used in pressure vessels, pipelines, and structural connections. Electroplating can cause delayed fracture; Dacromet does not.

Thin Uniform Coating: Coating thickness is typically 6–12 microns, ensuring consistent thread engagement and reliable clamp load on flange joints.

Heat Resistance: Maintains anti-corrosion properties at elevated temperatures (up to 300°C), suitable for engine, exhaust, and high-temperature process equipment bolting.

Good Paint Adhesion: Dacromet surfaces accept subsequent paint or topcoat systems if additional color coding or extra protection is required.

Typical Technical Specifications

Parameter Typical Value for Dacromet Flange Bolts
Coating Thickness 6 – 12 μm (standard); up to 15–20 μm for heavy duty
Appearance Silver-gray metallic finish
Salt Spray Resistance ≥ 500 hours (standard); ≥ 1000 hours (enhanced)
Operating Temperature -40°C to +300°C continuous
Coefficient of Friction Approximately 0.12 – 0.18 (dry)
Common Bolt Grades 8.8, 10.9, 12.9, ASTM A193 B7, A320 L7

5. Common Applications of Dacromet Flange Bolts

Dacromet coated flange bolts and stud bolts are widely specified where reliable anti-corrosion performance and mechanical integrity are both required:

Industry / Sector Typical Use of Dacromet Flange Bolts
Automotive & Transportation Chassis, suspension, exhaust flange bolts; underbody fasteners requiring long-term rust protection
Construction & Infrastructure Structural flange connections, bridge bolting, outdoor steel structures exposed to weather
Oil, Gas & Petrochemical Pipeline flange bolting, valve assemblies, equipment in mildly corrosive atmospheres
Wind Energy & Power Tower section flange bolts, nacelle assemblies requiring reliable anti-rust performance
Agricultural Machinery Equipment exposed to moisture, fertilizers, and outdoor conditions
General Industrial Any flanged connection where zinc plating is insufficient and stainless steel is cost-prohibitive

6. Frequently Asked Questions

Q1: Can Dacromet coated flange bolts be used outdoors?

A: Yes. Dacromet provides excellent long-term anti-corrosion protection in outdoor and moderately aggressive environments. For extreme marine or highly acidic conditions, additional topcoats or alternative systems (such as Xylan) may be considered.

Q2: Does Dacromet affect the torque-tension relationship of the bolt?

A: The coating has a relatively consistent coefficient of friction. However, it is always recommended to determine the specific K-factor or nut factor for the particular Dacromet formulation and lubricant condition used on the flange bolt assembly to ensure accurate clamp load.

Q3: Is Dacromet the same as Geomet or Magni?

A: They belong to the same family of zinc-aluminum flake coatings. Dacromet is the original brand name; Geomet and Magni are competing or evolved systems with similar anti-rust principles but different formulations and environmental profiles (some are chrome-free).

Q4: Can high-strength bolts (Grade 10.9 / 12.9) be Dacromet coated?

A: Yes. One of the major advantages of Dacromet over electro-galvanizing is the absence of hydrogen embrittlement risk, making it highly suitable for high-tensile flange bolts and critical structural fasteners.

DACROMET COATED FLANGE BOLTS (2)

7. Summary

Dacromet coated flange bolts offer an excellent combination of anti-corrosion performance, mechanical reliability, and cost-effectiveness. They are particularly valuable when high-strength bolts must operate in environments where traditional zinc plating would fail too quickly, yet the full performance (and cost) of PTFE-based coatings such as Xylan is not required.

By choosing Dacromet flange bolts, engineers gain reliable rust protection, freedom from hydrogen embrittlement concerns, and consistent fastening performance — making them a preferred solution for a wide range of industrial, automotive, and infrastructure bolting applications.

Home
Products
About Us
Contact us